Machine de découpe de sacs de sport à une ligne / Une erreur s'est produite. Texte supplémentaire rencontré après avoir fini de lire le contenu JSON : m. Chemin '', ligne 1, position 8.

Servo motor and inverter system is used.

Temperature, production quantity, machine speed, etc. can be displayed on the control screen. Ease of use is provided thanks to buttons such as.

In the machine, bag size, robot speed and position are automatically adjusted according to bag size. All data can be viewed on the screen.

Bobbin warping is done according to the bobbin diameter size with a motorized pulley system.

A sensor product end system was used. In this way, the machine stops automatically when the product is finished.

The edge control system was installed on the machine, enabling the binding of high weight bobbins and precise edge control.

Thanks to the photocell system, printed bags are also cut precisely.

It provides ease of use for the operator with its automatic tilting jaw system with pneumatic equipment.

Each bag is stacked on hot and cold needles 10 cm from the end.

Thanks to the zig-zag group, it is ensured that the welding areas do not overlap.

Waste discharge press group is done with hydropneumatic system.

The cut waste is carried out of the machine with the waste conveyor.

The cut products are stacked on the conveyor at the machine exit and carried to the operator.

The machine is capable of working with high density polyethylene (HDPE), low density polyethylene (LDPE), 2nd quality recycling and bio materials.

Atlas 500T Technical Specifications