Ø 42 – 400mm Portatif Hat Delme Makinası
Ø 42 - 400mm Portable Boring Machine
The Supercombinata SC1 is suitable for internal boring and internal overlay welding in the range of Ø 42 mm to Ø 400 mm (including blind holes) with its standard equipment. Suitable for drilling and guide pulling.
With its extra kits, it is suitable for external turning, covering of vertical surfaces at right angles, groove creation for washers, and internal threading. With its additional accessories, Supercombinata can meet many different needs of our customers. It is available in both 230V or 110V power supply control panel and digital version.
|
Technical Specifications |
|
|---|---|
|
Boring Bar Diameter |
: Ø 40x2200 MM |
|
Boring |
: Ø 42- 400 MM |
|
External Turning |
: Extra Kit |
|
Internal Welding |
: Ø 42- 400 MM |
|
External Welding |
: Ø 42- 400 MM |
|
Drilling |
: Suitable |
|
Guide Pulling |
: Suitable |
|
Thread Cutting |
: Extra Kit |
|
Processing of Vertical Surfaces at Right Angles |
: Extra Kit |
|
AC Motor |
: Single Phase |
|
Power at Nominal Speed |
: 1800 W |
|
Tool Case |
: 4 - Speed |
|
Bar Output Torque |
: Up to 400 NM with 95 RPM |
|
Motor Gear |
: Direct Current |
|
Power at Nominal Speed |
: 90 W |
|
Max. Speed |
: 11 RPM |
|
Feeding System |
: Electromechanical |
|
Feeding |
: Manual / Automatic |
|
Turning Motor Feeding Motor Welding Technology |
|
|---|---|
|
Spiral |
: Follows Changing Steps |
|
Welding Machine |
: Compatible with EURO Conn. MIG/ MAG Welding Machines |
|
Length |
: 680 MM |
|
Width |
: 240 MM |
|
Height |
: 380 MM |
|
Center Unit Weight |
: 36 KG |
|
Voltage |
: 230 V (50 Hz) |
|
Main Switch |
: Available |
|
Emergency Stop |
: Available |
|
Inverter Supply |
: RH/LH |
|
Inverter Rotation |
: CW/CCW |
|
Speed Regulator |
: Rotation/Feeding |
|
Power Consumption |
: 2000 W |
|
Control Panel 110/120 V |
: Upon Request |
|
Digital Control Panel |
: Upon Request |
