DAMS Roll Bread Making Machine / DREM-11

DAMS Roll Bread Making Machine / DREM-11

GENERAL SPECIFICATIONS

? The settings are made easily from the PLC-controlled touch screen.

? Mechanical settings are simple to use and easy to learn.

? Information on usage can be stored in memory and used continuously.

? Daily cleaning is easy.

? It is easy to disassemble, install and replace belts and running parts.

? The speeds of all belts can be adjusted to the desired level.

? Electrical and electronic faults that may occur are displayed on the PLC screen with pic and text.

? In case of malfunction, remote access can be performed with PLC program (Optional) 

CUTTING SECTION

? Machine body is 304 crom. The contact surfaces of the dough are 304 crom and crom coating.

? Cutting grammage ranges as below;

30 – 110 gr
40 – 160 gr
50 – 180 gr
70 – 200 gr

? Different outer drums are used for dough cutting in these weight ranges.

? Average roll bread dough cutting and rounding capacity is 11.000 in 1 hour.

? Maximum11,000 pieces of hamburgers and pastry dough per hour, the average of

? 7,000 pieces of bagel and sandwich dough.

? Since very little flour is used in the dough section, it provides a clean working environment.

? The amount of flour given to the cut dough can be adjusted.

? The lubrication system is automatically adjusted during the dough cutting process.

? Unlike other machines, it does not wear pulp due to non-pressurized cutting.

AUTOMATIC TRAY LOADING MACHINE

? The pan enters the Tray Loading Machine automatically. It exits automatically after laying.

? The spreading distance is adjusted via the screen.

? Automatically sorts the cutten dough into the desired size tray.

? Tray dimensions should be reported in advance. Laying size changes for non-standard tray.

? It makes automatic sorting with simple settings on corrugated and flat trays.

? If the tray is not properly placed, sorting will not take place, it will give a warning on the screen.

Note: Since there are pneumatic pistons on the machine, air of minimum 4 bar pressure is required for the operation of the machine. 5 * 2.5 multiple cables must be use for electricity.

In order to prevent damage to the automation products used in the machine, a suitable regulator is recommended to prevent voltage fluctuations in electricity