400 Kg Motorized Door Motor Kit with Accessories

400 Kg Motorized Accessorized Automatic Gate Motor Kit

The Tau TAU-TONE-4B 400 Kg Accessorized Gate Motor Kit is an excellent option for residential buildings. The features and functions of this motor kit are designed to meet your gate automation needs.

The most notable feature of this motor kit is its 24 V DC power supply, which provides a high-performance motor suitable for intensive use. With a maximum gate pulling/pushing capacity of 400 kg, it is perfectly suited for a variety of gate types and sizes.

The magnetic encoder system offers obstacle detection and anti-crushing, minimizing safety concerns. The electromechanical limit switch ensures safe stopping during gate opening and closing, preventing unwanted accidents.

The soft start and soft stop feature allows the gate to move smoothly and quietly. The automatic closing time is adjustable, allowing users to set the desired closing time interval from 1 to 120 seconds.

General Description:

• Suitable for residential buildings.
• System power supply is 230 V, and motor power supply is 24 V DC (24 V DC motor ensures high performance and is suitable for intensive use).
• Maximum gate pulling/pushing capacity of 400 kg.
• Magnetic encoder system offers obstacle detection and anti-crushing features.
• Electromechanical limit switch stops the gate during opening and closing.
• Soft start and soft stop functionality.
• The slowing down distance of the gate can be adjusted via the control unit.
• The automatic closing time can be adjusted between 1 and 120 seconds.
• Under normal operating conditions, the noise produced by the reducer motor should not exceed 70 dB.
• The control unit must be mounted on top of the motor.
• The control unit must be housed in a special plastic protective cover.
• The automation system must be classified as "machinery" and comply with the European Directive 2006/42/EC (specifically EN12445, EN12453, and EN12635).
• Microprocessor-controlled logic settings can be adjusted via the control unit.
• The control unit should have two selectable working modes: standard mode (non-bridged) and low power mode (bridged) via a jumper.
• The internal receiver should support programming at least 30 Rolling Code remotes at 433.92 MHz.
• The receiver card capacity can be increased upon request.
• Fault detection is possible via different colored LEDs on the control unit.
• The control unit can be reset to factory settings.
• The motor and control unit are protected from UV rays with a motor protection cover.
• Internal gears of the motor should be metal for longer life.
• In case of power failure, the motor can be manually operated with a personal key.
• The control unit should have an antenna connection output for the flasher warning light.
• Equipment such as a flasher, safety photocell, button, pneumatic device, loop detector, edge safety system, etc., can be connected.
• The control unit should have a pedestrian entrance button connection.

Optional:

• Optional backup battery for operation during power outages.
• Increase the number of remotes with an external receiver unit.
• Remote control via smartphone using the Wi-Fi module.

Warranty: The sliding gate motor manufacturer provides at least a 2-year warranty and a 10-year spare parts availability guarantee.

Certification: The sliding gate motor has a CE declaration certificate.

Origin: 100% ITALY.

Technical Specifications: