STANDARD EQUIPMENT
| TECHNICAL SPECIFICATIONS |
|
EMGA-1310 X 2.5 |
| Blade Length |
mm |
1310 |
| Cutting Length |
mm |
1300 |
| Cutting Capacity |
mm |
2.50 |
| Stainless Steel |
mm |
1.50 |
| Cutting Angle |
degree |
2 |
| Cutting Frequency per Minute |
pcs/min |
80 |
| Rear Support Clearance |
mm |
540 |
| Motor Power |
kW |
3 |
| Motor Speed |
rpm |
1400 |
| Input Voltage |
V/ph |
380/3 |
| Length |
mm |
2000 |
| Width |
mm |
1550 |
| Height |
mm |
1050 |
| Approximate Weight |
kg |
900 |
STANDARD EQUIPMENT
- Cast iron legs
- Platino table and upper jaw
- Mechanical pressure system preventing the slipping of the sheet during cutting
- Adjustable guides for the upper jaw
- Rear support system suitable for cutting narrow and thin sheets
- One-piece 2379 steel blades that can be used in four directions
- Easy-to-adjust sentil adjustment system
- Non-overlapping system preventing the stacking of blades
- Foot pedal system suitable for single and serial cutting
- Millimetric mitre for straight cutting
- Quiet operating clutch system
- Wide and angled sheet compatible front mitre and front arms
- Protective housing for main shaft and eccentric arms
- Protective cover for flywheel
- Electrical 380 V 50 Hz 3 Ph
- Cast iron legs
- Platino table and upper jaw
- Mechanical pressure system preventing the slipping of the sheet during cutting
- Adjustable guides for the upper jaw
- Rear support system suitable for cutting narrow and thin sheets
- One-piece 2379 steel blades that can be used in four directions
- Easy-to-adjust sentil adjustment system
- Non-overlapping system preventing the stacking of blades
- Foot pedal system suitable for single and serial cutting
- Millimetric mitre for straight cutting
- Quiet operating clutch system
- Wide and angled sheet compatible front mitre and front arms
- Protective housing for main shaft and eccentric arms
- Protective cover for flywheel
- Electrical 380 V 50 Hz 3 Ph
