800/1200 mm Manual Waste Separation Platform

Fresh ventilation air conditioner: There is a fresh air ventilation system in the sorting room, which can provide fresh air and create sterilization and negative oxygen conditions. The air outlet of this system is located just above each separation station in the manual separation chamber. In this way, the working environment of the operator will be better.
Manual sorting station: It can be adjusted according to the capacity. The sorting staff stands at both ends of the belt conveyor, and the back of the sorting staff is away from the aisle and the wall. The sorted materials are manually thrown into the chimney and fall to the lower part of the separation chamber from there. The bottom can be equipped with a container or basket so that falling materials fall into this container. This design method increases the distance between the person and the sorted wastes and largely eliminates the effect of the odor emitted by the wastes separated in the traditional design method on human health.
Separating belt conveyor: There is a horizontal material conveying conveyor in the middle of the separation chamber, which is suitable for manual separation. The width of the conveyor can be designed according to the throughput. The width of the conveyor is in ideal dimensions that will not affect the sorting effect of the wastes.
Sorting room: Thermal insulation, spacious and bright, providing a comfortable working environment for sorting personnel. The Separation Chamber is equipped with a series of large and bright glass windows. There are at least two outer doors in the sorting room where the personnel is very busy. The separation platform is produced as a reinforced concrete structure or as a steel platform on which anti-slip pattern plates are laid. Load handling requirements are designed to bear the weight of conveyor equipment, sorters and maintenance personnel.